REFRESH YOUR EQUIPMENT

Inspect your gear for degradation and proper function.

Diving Equipment

It is not always obvious when your equipment needs maintenance or replacement, especially after a long break from diving. Some less obvious problems can easily slip under your radar. We all know that equipment failures can and do happen, but these failures still catch divers off guard.

Some gear you can assess yourself; others will need to be serviced by a qualified technician.

If you have purchased any new gear during the time you were not diving, be sure to thoroughly familiarize yourself with it before you get back in the water.

Inspect Your Gear Before Your Dive Trip

Take care of your gear, and your gear will take care of you. This is especially important if you have been away from diving for an extended period and your gear was unused.

Masque

Check for cracks, tears, pliability of the strap, mold, and if equipped, the purge valve.

Fins

Check for tears, pliability, and that buckles and straps are operational.

Tuba

Check for mold and pliability of the mouthpiece, check for cracks or other damage to the tube, and check that the purge valve and diverter, if fitted, are functioning correctly.

Gloves, Hood & Boots

Check that the zippers are working smoothly. Examine material for tears and stitching and that the material is still pliable and comfortable to wear.

Wetsuit

Check that the zippers are working smoothly, for tears and stitching, and that the suit is still pliable, fits and is comfortable to wear. Ensure semi-dry wetsuit seals are intact.

Drysuit

Check that zippers are working smoothly, check for tears and stitching, confirm that neck and wrist seals are in good condition, and ensure all taped and glued parts are intact and secure. Check the inflator and exhaust valves for proper function and any damage. If fitted, check that the p-valve is unobstructed, functional and clean.

BCD

BCDs should be serviced at least annually (or prior to resuming diving after time away). Experienced divers may do it themselves. Check the following to assess the integrity of the BCD: tears, rips, stitching, glued parts, D-rings, buckles, and Velcro on the cummerbund. Check for cracks and damage and confirm function of the manual and power inflators and dump valves. The bladder should be inflated to ensure it holds air.

Weights

Check for tears or damage and that the releases work smoothly and effectively. Zippers should be checked for function.

Regulator & Hoses

Ensure that the first stage regulator is clean – including the inlet filter, and if due for a service, is sent to a certified competent service facility. Inspect the second stage for any signs for cracking or damage, leaks or free flow. Perform a breathing and a purge test.

Computer

Check the computer for any mechanical damage. Check that the batteries are still able to power and backlight the computer fully, or are charged if applicable. Check the strap for pliability, damage and that the buckles or fasteners are functional. Re-familiarize yourself with the operations of your computer. Review computer manual.

Additional Equipment Resources

Gear Maintenance

Protect your investment and prevent dive accidents. Scuba gear is life-support equipment
and is just as important to maintain as one’s physical health or personal vehicle.

Full Story

How Old is Too Old

Dive gear such as dive computers and buoyancy compensator devices
(BCDs) get old, too. When should we consider replacing them?

Full Story

How to Clean Your Scuba Equipment

Dive gear can be contaminated when stored, mold can form, and dust can enter into openings. Cleaning
is not just about infection control and is an essential part of maintaining your equipment.

Full Story

New Gear Orientation

Take time to become familiar with your new equipment before returning to diving. Whether you are a new diver buying your
first set of gear or an experienced diver purchasing an updated piece of equipment, it is important to learn about that new gear.

Full Story

Sécurité des bouteilles

Ensuring the safety of your dive cylinder is just as much your responsibility as that of the filling station.

Full Story

Are 6351-T6 Alloy Scuba Cylinders Safe to Use?

Cylinders made from this grade of aluminum have been known to rupture during filling and use. There are
safety requirements in place to prevent this from happening, but you need to know and follow these.

Full Story

Invisible Crystals

Reports of regulator failure due to blockage by degraded breathing hoses initiated an investigation into why
this happens. Divers need to read this article and follow the guidelines carefully when using braided hoses.

Full Story

Air Hoses: A Closer Look

This article summarized the reasons for the degradation of certain brands of braided breathing hoses.

Full Story

Hose Failure

Hose degradation is potentially an unseen hazard that you should consider during your predive check.

Full Story

<< Back

Main Page

Next >>

DAN Service clientèle

Asie-Pacifique

Téléphone : +61-3-9886 9166

Courriel :

Du lundi au vendredi, de 9 h à 21 h HNEA

Amérique latine et Caraïbes & Caraïbes

Téléphone: +1-202-470-0929 (Anglais)

Téléphone : +52-55-8421-9866 (en espagnol)

Courriel :

Ligne d’appels d’urgence,
24 heures sur 24, 7 jours sur 7

+1 (919) 684-9111

1800 088 200
en Australie

+62 21 5085-8719
en Indonésie

DAN medics (les professionnels de santé) sont disponibles 24 heures sur 24, 7 jours sur 7 et 365 jours par an.

Les appels internationaux à frais virés sont acceptés

Les appels internationaux à frais virés sont acceptés

Ligne d’information médicale

Obtenez des réponses à vos questions non urgentes relatives à la santé et à la plongée.

Du lundi au vendredi de 08 h 30 à 17 h HE

+1 (919) 684-2948, Option 4

En ligne Demander à un medic (professionel de santé)

Comptez 24 à 48 heures pour obtenir une réponse.

Ressources sur la sécurité en plongée

Santé et médecine

Sécurité des plongeurs

Sécurité des opérations de plongée

Sécurité des Caissons